- 您现在的位置：买卖IC网 > Sheet目录312 > AT24C16AY6-10YH-1.8 (Atmel)IC EEPROM 16KBIT 400KHZ 8DFN
ACKNOWLEDGE POLLING: Once the internally timed write cycle has started and the
EEPROM inputs are disabled, acknowledge polling can be initiated. This involves sending a
start condition followed by the device address word. The read/write bit is representative of the
operation desired. Only if the internal write cycle has completed will the EEPROM respond
with a zero allowing the read or write sequence to continue.
Read
Operations
Read operations are initiated the same way as write operations with the exception that the
read/write select bit in the device address word is set to one. There are three read operations:
current address read, random address read and sequential read.
CURRENT ADDRESS READ: The internal data word address counter maintains the last
address accessed during the last read or write operation, incremented by one. This address
stays valid between operations as long as the chip power is maintained. The address “roll
over” during read is from the last byte of the last memory page to the first byte of the first page.
The address “roll over” during write is from the last byte of the current page to the first byte of
the same page.
Once the device address with the read/write select bit set to one is clocked in and acknowl-
edged by the EEPROM, the current address data word is serially clocked out. The
microcontroller does not respond with an input zero but does generate a following stop condi-
tion (see Figure 10 on page 12).
RANDOM READ: A random read requires a “dummy” byte write sequence to load in the data
word address. Once the device address word and data word address are clocked in and
acknowledged by the EEPROM, the microcontroller must generate another start condition.
The microcontroller now initiates a current address read by sending a device address with the
read/write select bit high. The EEPROM acknowledges the device address and serially clocks
out the data word. The microcontroller does not respond with a zero but does generate a fol-
lowing stop condition (see Figure 11 on page 12).
SEQUENTIAL READ: Sequential reads are initiated by either a current address read or a ran-
dom address read. After the microcontroller receives a data word, it responds with an
acknowledge. As long as the EEPROM receives an acknowledge, it will continue to increment
the data word address and serially clock out sequential data words. When the memory
address limit is reached, the data word address will “roll over” and the sequential read will con-
tinue. The sequential read operation is terminated when the microcontroller does not respond
with a zero but does generate a following stop condition (see Figure 12 on page 12).
10
AT24C01A/02/04/08A/16A
0180Z1–SEEPR–5/07
发布紧急采购，3分钟左右您将得到回复。
相关PDF资料
AT24C16BY6-YH-T
IC EEPROM 16KBIT 1MHZ 8DFN
AT24C256BW-SH-T
IC EEPROM 256KBIT 1MHZ 8SOIC
AT24C256C-XHL-B
IC EEPROM 256KBIT IND 8TSSOP
AT24C32AY6-10YH-1.8
IC EEPROM 32KBIT 400KHZ 8DFN
AT24C512BY7-YH25-T
IC EEPROM 512KBIT 1MHZ 8SAP
AT24C512W-10SU-1.8
IC EEPROM 512KBIT 400KHZ 8SOIC
AT24C64B-10TU-1.8
IC EEPROM 64KBIT 400KHZ 8TSSOP
AT24C64CY6-YH-T
IC EEPROM 64KBIT 1MHZ 8MLP
相关代理商/技术参数
AT24C16B
制造商:Atmel Corporation 功能描述:
AT24C16B_08
制造商:ATMEL 制造商全称:ATMEL Corporation 功能描述:Two-wire Serial EEPROM
AT24C16B_09
制造商:ATMEL 制造商全称:ATMEL Corporation 功能描述:Two-wire Serial EEPROM
AT24C16BD3-DH-T
功能描述:电可擦除可编程只读存储器 Serial 电可擦除可编程只读存储器
RoHS:否 制造商:Atmel 存储容量:2 Kbit 组织:256 B x 8 数据保留:100 yr 最大时钟频率:1000 KHz 最大工作电流:6 uA 工作电源电压:1.7 V to 5.5 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:SOIC-8
AT24C16BN-SH-B
功能描述:电可擦除可编程只读存储器 16K 2-WIRE 2048 X 8 RoHS:否 制造商:Atmel 存储容量:2 Kbit 组织:256 B x 8 数据保留:100 yr 最大时钟频率:1000 KHz 最大工作电流:6 uA 工作电源电压:1.7 V to 5.5 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:SOIC-8
AT24C16BN-SH-T
功能描述:电可擦除可编程只读存储器 1.8V - 1.8V RoHS:否 制造商:Atmel 存储容量:2 Kbit 组织:256 B x 8 数据保留:100 yr 最大时钟频率:1000 KHz 最大工作电流:6 uA 工作电源电压:1.7 V to 5.5 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:SOIC-8
AT24C16B-PU
功能描述:电可擦除可编程只读存储器 8 PDIP 1.8V -1.8V RoHS:否 制造商:Atmel 存储容量:2 Kbit 组织:256 B x 8 数据保留:100 yr 最大时钟频率:1000 KHz 最大工作电流:6 uA 工作电源电压:1.7 V to 5.5 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:SOIC-8
AT24C16B-PU-RET
制造商:Atmel Corporation 功能描述: